Price: ₹12,800 - ₹10,139.00
(as of Sep 01, 2024 11:45:12 UTC – Details)
From the manufacturer
Specifications Acoustic Principle: Line Gradient Active Electronics: JFET impedance converter Capsule: 0.50″ Polar Pattern: Supercardioid Address Type: End Frequency Range: 40Hz – 20kHz Output Impedance: 200Ω Maximum SPL: 134dB SPL (@ 1kHz, 1% THD into 1KΩ load) Sensitivity: -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted): 20dB-A Power Options: 9v battery powered Weight: 176.00gm Dimensions: 65.00mmH x 102.00mmW x 250.00mmD Output: minijack / 3.5 mm Warranty: 1 year with free extension to 10 years following registration
Rode VideoMic
Directional On-Camera Microphone
The RØDE VideoMic is a professional grade 1/2 inch condenser shotgun microphone designed for use with consumer video cameras and personal audio recorders.
The integrated Rycote Lyre based shock mounting system isolates the VideoMic capsule and electronics from its all-metal shoe mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.
Its standard sized shoe mount also includes a 3/8 inch thread in the base for easy mounting on a boom pole or stand. By employing a super-cardioid polar pattern, the VideoMic becomes highly directional, focusing on the subject in front of the camera, and minimizing any surrounding sounds.
In addition to the microphone’s native 40Hz-20kHz response, a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded. A -10dB and -20dB level attenuation (or PAD), selectable from inside the battery compartment, allows recording of loud sound sources, such as live music or motorsport.
The RØDE VideoMic directional on-camera microphone is designed in Australia and covered by RØDE Microphones’ industry leading 10 year warranty.
Studio recording quality Super-cardioid polar pattern Integrated Rycote Lyre shock mounting Two step High Pass Filter (Flat/80Hz) Three step PAD (0, -10, -20dB) Rugged reinforced ABS construction Windshield included 3.5mm mini-jack output Integrated cold-shoe mount (3/8” thread)
RØDE VideoMic with Rycote Lyre Pack
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Customer Reviews
4.0 out of 5 stars
2,619
4.1 out of 5 stars
19,866
4.0 out of 5 stars
9,454
4.3 out of 5 stars
2,466
—
4.4 out of 5 stars
2,294
Price
₹5,881.00₹5,881.00 ₹5,158.00₹5,158.00
— ₹10,139.00₹10,139.00
— ₹21,044.00₹21,044.00
Which VideoMic Are You?
Ideal For:
Smartphones Camcorders, point and shoot, entry level DSLR Camcorders, point & shoot, entry-level DSLR (Not compatible with Nikon D7000) Camcorders, mid-range DSLR Camcorders, mid-range DSLR High-end DSLR, Full frame cameras
Scenarios:
Dialogue to camera, interview, movies Dialogue to camera, interview, sports, music Interview, dialogue to camera, sporting events, ambient audio, music Interview, dialogue to camera Interview, dialogue to camera Interview, dialogue to camera, sporting events
Included Accessories:
Deluxe furry windshield Deluxe furry windshield, 3.5mm TRS patch cable, Lyre shoe mount Windshield, 3.5mm TRS patch cable Windshield Windshield, Boom Pole, Mic screw adaptor, Headphone extension cable (25′) Windshield
Output:
Mono (same output to Left and Right) Mono (same output to Left and Right) Mono (same output to Left and Right) Mono (same output to Left and Right) Mono (same output to Left and Right) Mono (same output to Left and Right)
Power:
Supplied by device Supplied by device Supplied by camera 9V battery 9V battery 9V battery
Frequency Response:
100Hz – 20kHz 100Hz – 20kHz 100Hz – 16kHz 40Hz – 20kHz 40Hz – 20kHz 40Hz – 20kHz
High Pass Filter:
None None None 80Hz 80Hz 80Hz
Level Switch:
None None None -20dB, -10dB -20dB, -10dB -10dB, +20dB
Broadcast and studio sound quality
Rugged reinforced ABS construction
Two step high-pass filter – flat or 80 Hz
Integrated shock mount
9 V battery operation
